This week we will be offering three great webinars, two of which will be tips and tricks using Verisurf and one will be on Mastercam. Full details are below. Make use of some of your downtime and join us for one or all of the following events. Verisurf – Inspection Software Running Inside Mastercam Date: Monday, May 4th Time: 11:00 am In the first chapter, we will exhibit the use of Master 3D Gage. We [...]
Mastercam Programming Multiple Parts in an Assembly file Watch this on-demand replay of Mastercam 30-minute webinar that was live on May 1st which demonstrates Mastercam programming multiple parts in Assembly files and answers your questions. https://cimquesttv.wistia.com/medias/kyavnptmxg?embedType=async&videoFoam=true&videoWidth=640
reprint from https://www.digitalengineering247.com/ This enables ESTANE 3D TPU M95A to be a material solution for product designers exploring 3DP for end-use applications that require skin contact. Lubrizol’s 3D TPU is part of the material solutions for polymer powder bed fusion 3D printing. Image courtesy of Lubrizol. Lubrizol Engineered Polymers' new ESTANE 3D TPU M95A powder TPU has passed skin sensitization and cytotoxicity tests in accordance with ISO 10993-5 and 10993-10. This enables ESTANE [...]
HP, packing density, does it really matter? One of the parameters that is monitored by HP before sending a build to the MJF printer is “packing density”...but how much does it really matter? Join us as we take a closer look into the effects of pack density on your production, and discuss the pros and cons of both ends of the packing density spectrum. https://cimquesttv.wistia.com/medias/05p45vfzaa?embedType=async&videoFoam=true&videoWidth=640
Verisurf - Inspection Software Running Inside of Mastercam - On Demand Webinar In the first chapter of this webinar series we will exhibit the use of Master 3D Gage. We will demonstrate applying targets to a model to execute a 3-2-1 Alignment by way of using a 5mm Renishaw Ruby probe. Once aligned, we will use the BUILD module to verify the alignment and manually check coordinate locations on the model as well as establish [...]
Mastercam Mill 2D Toolpaths - Webinars on Demand Interested in seeing all of the possibilities Mastercam 2020 has for programming 2D toolpaths? Watch this on demand replay of Cimquest's 30-minute webinar that was live on April 28th and demonstrates Mastercam Mill and answers your questions. https://cimquesttv.wistia.com/medias/v5ndf5yjcx?embedType=async&videoFoam=true&videoWidth=640
https://cimquesttv.wistia.com/medias/e9f2exl9tx?embedType=async&videoFoam=true&videoWidth=640 Mastercam 2020 - Cartesian Coordinates in Mastercam When working with Mastercam it is helpful to remember we are working in a Cartesian coordinate in Mastercam with regard to an X,Y,Z origin. The Mastercam X,Y,Z coordinate’s system also follows right hand rule whereas X positive moves from the left to the right of the origin.
Here is a list of some of the free upcoming webinars that Cimquest will be hosting over the next couple of weeks. If you would like to join us for any of these, just click the Register button at the bottom of each event. Mastercam Mill 2D Tues April 28, 2020 9:30 - 10AM EDT Interested in seeing all of the possibilities Mastercam 2020 has for programming 2D toolpaths. Join us for this 30-minute webinar [...]
