Control X – Creating Multiple Section Planes in a Single Command
In this week's 2 Minute Tuesday, we are going to demonstrate the creation of multiple section planes in a single "2D Section" command in Oqton's Geomagic Control X.
In this week's 2 Minute Tuesday, we are going to demonstrate the creation of multiple section planes in a single "2D Section" command in Oqton's Geomagic Control X.
Removing Xact Metal DMLS Supports In this week's 2 Minute Tuesday, we take a look at how to remove Xact Metal Direct Metal Laser Sintering (DMLS) supports from completed parts. In this video, we'll guide you through the process of safely and effectively separating supports from the build plate, removing supports from your metal 3D printed part, and cleaning up support touch points.
Incremental vs. Absolute Depth - Mastercam 2023 In this week's 2 Minute Tuesday, I am going to show you the differences between Incremental and Absolute Depths in Mastercam’s Linking Parameters.
In this week's 2 Minute Tuesday, we will examine how to resize section planes so that just the necessary geometry is displayed in Geomagic Control X. This becomes extremely useful for very complex models where you want to draw the reviewer’s attention to a specific location on the model.
Materialise Magics – Packing for SLS and MJF In this week's 2 Minute Tuesday, we take a look at how to incorporate 3D packing software into your plastic powder workflow.
Troubleshooting 3D Toolpath Jumping - Mastercam 2023 In this week's 2 Minute Tuesday, we take a look at how to resolve a common issue that can arise when using 3D toolpaths; erratic jumping along the cut.
In this week's 2 Minute Tuesday, we delve into the Measure Menu of Geomagic’s Control X software, examining the features it offers. While most users of Control X are interested in producing color maps, whisker plots, dimension checks, and GD&T analyses of the scan as compared to the nominal CAD model, it is important to note that there are several “mesh-only” functions for measuring a scan model that do not require a nominal CAD model. [...]
Live Sinter | 2 Minute Tuesday (Extended Edition) In this week's 2 Minute Tuesday, we take a look at effective ways to ensure that metal 3D printed parts meet form and dimensional requirements right out of the furnace.