Mastercam 2025 – Chamfer Drill Maintain FPT | 2 Minute Tuesday In this week's 2 Minute Tuesday, we show you a new feature in Mastercam's Chamfer Drill, "Maintain Feed Per Tooth." Or watch and subscribe on YouTube ➤ https://youtu.be/kxph2HY3j5w
Control X – Repositioning a Crankshaft In this week's 2 Minute Tuesday, we explore how to reposition the nominal CAD model in Oqton's Control X so that inspection information is reported based upon the main assembly’s coordinate system and not the local subassembly. We use a crankshaft as our sample.
Third-Party Technologies for Mastercam | 2 Minute Tuesday In this week's 2 Minute Tuesday, with the release of Mastercam 2025, we’ve decided to cover three third-party technologies that are complementary to Mastercam. We will cover programming and running your CMM from Mastercam, going from scan data to machinable Mastercam models, and DNC and shopfloor data collection for Mastercam users.
Mastercam 2025 Migration | 2 Minute Tuesday In this week's 2 Minute Tuesday, we demonstrate how to migrate your machine definitions and post files from previous versions of Mastercam to Mastercam 2025.
Freeform Plus – Exporting a Clay Model for 3D Printing In this week's 2 minute Tuesday, we revisit a very popular webinar presented several months ago titled, “Redefining Patient-Specific 3D Design,” to discuss how a clay model can be exported for 3D printing applications from Oqton's Freeform Plus.
Freeform Plus – StructureFX In this week's 2 Minute Tuesday, we delve into the StructureFX tool in Oqton’s Freeform Plus. The StructureFX tool enables the user to algorithmically generate complex clay structures that would otherwise be extremely difficult or virtually impossible to create using other clay modeling methods.
Mastercam 2024 – Machine Group Setup to Define Multiple Stock Definitions | 2 Minute Tuesday In this week's 2 Minute Tuesday, we demonstrate how to set up multiple stock definitions and how to simulate multiple pieces of stock in Mastercam 2024.
Freeform Plus – Closed and Open Curves for Detailing Clay In this week's 2 Minute Tuesday, we examine the use of closed and open curves for detailing clay models in Oqton's Freeform Plus
