Welcome to the Cimquest Blog!
Check here often to find Cimquest, Mastercam and 3D Printing happenings, product offerings and update info along with general Industry trends and breaking news.
August 2017
3D Printing for Low Volume Production
Companies in certain industries sometimes require customized end-use parts, used to either replace older parts or improve upon infrastructure. While necessary, the cost and time barriers associated with one-off parts can cause for engineering teams to postpone or even eliminate projects altogether.
Siemans Mobility based in Germany develops technology for vehicles and infrastructure for transport machines. The unique needs of their customer base demands innovation in low […]
FDM Thermoform Tooling: What It Is and Why It Works
A kitting tray 3D printed using thermoformed plastics.
There’s a good chance you interact with multiple thermoformed products on a daily basis, whether that be in your grocery store, your car, or probably even your fridge. But what does it mean if something is thermoformed? Thermoforming is a conventional plastics forming process where heat is used to bring a sheet of plastic to its sagging […]
Additive Manufacturing Changes How We Think About Design
As 3D printing has become more and more mainstream, the traditional resource and skills barriers for manufacturing are all but vanishing. This trend is changing the very face of design.
For the first time, producing complex products is no more difficult, expensive, or time-consuming than making simpler objects. 3D printing a block with holes, notches, and rounded edges is as approachable as printing a solid block once […]
Mastercam for SolidWorks Router Now Available
There is an entirely new machining option in Mastercam for Solidworks. Now the functionality of Mastercam Router is available to be licensed in Mastercam for Solidworks. This gives you access to new toolpaths and design features.
To see how this works we will open Solidworks and enable the Mastercam for Solidworks add-on. The Mastercam info center will appear to the right once the startup is […]
Additive Manufacturing Will Change How We Think About Design
As 3D printing has become more and more mainstream, the traditional resource and skills barriers for manufacturing are all but vanishing. This trend is changing the very face of design.
For the first time, producing complex products is no more difficult, expensive, or time consuming than making simpler objects. 3D printing a block with holes, notches, and rounded edges is as approachable as printing a solid block […]
July 2017
Mastercam Spline Editing
There are some great tools in Mastercam for repairing geometry. Spline Re-fit cleans up spline data resulting in smoother surfaces, Un-trim Spline returns a spline back to its untrimmed state, and a new Blend option adds more control to corner smoothing.
If you analyze the properties of some splines you will notice the large number of […]