Welcome to the Cimquest Blog!
Check here often to find Cimquest, Mastercam and 3D Printing happenings, product offerings and update info along with general Industry trends and breaking news.
May 2017
Simplify Sacrificial Tooling with 3D Printing
The Problem: Complex composite parts with hollow interiors are difficult to manufacture.
Complex composite structures, with hollow interiors, present unique manufacturing challenges where internal tooling, generally referred to as a cores or mandrel, is required to define the hollow internal features. Any part configuration that traps the mandrel inside the composite part, requires sacrificial tooling* or a more complex, collapsible or inflatable tool.
*Sacrificial tooling – tooling that […]
Nylon 12CF – New 3D Printing Material
There is a new game-changing thermoplastic material for the Stratasys FDM family called Nylon 12CF. The CF is an abbreviation for carbon filled. In this material, chopped carbon fibers are added to a proven FDM Nylon 12 polymer blend resulting in one of the strongest thermoplastics in the FDM material portfolio.
Reverse Engineering Sheet Metal to a Flat Pattern
Today we are going to talk about how to reverse engineer a used sheet metal part back to its original flat pattern. This can be challenging at times, since sheet metal parts tend to bend and distort with normal use. Geomagic Design X can assist you in interrogating the geometry of the part, and reverse engineering it back to the original un-warped shape.
3D Printing to Treat Complex Structural Heart Disease
3D printing is a powerful technology with the potential to significantly change the practice of medicine. In the field of structural heart disease, this rapidly evolving technology can make a powerful impact.
Limitations of two-dimensional imaging and added benefits of 3D printing
Current conventional cardiac imaging modalities such as echocardiography (EKG), cardiac computed tomography (CT) or magnetic resonance imaging (MRI) primarily utilize two-dimensional […]
Introducing FDM Nylon 6 – New 3D Printing Material
There is a new FDM material from Stratasys called Nylon 6. The Nylon family of polymers is one of the most widely used thermoplastics in manufacturing. Nylon 66 was created in 1935 by DuPont as a synthetic substitute for silk. This synthetic plastic could be stretched into a fiber that increased in strength as it was stretched. Notable uses were toothbrush bristles, women’s stockings and […]
Mastercam 2017 Analyze Toolpath
There’s a new utility in Mastercam 2017 called Analyze Toolpath that helps you investigate what is happening at any point in your tool path. This feature is available in both Mastercam and Mastercam for SOLIDWORKS. In the standalone version of Mastercam you’ll want to make sure you’re on the Home tab and then you can head to the Analyze section […]