Welcome to the Cimquest Blog!
Check here often to find Cimquest, Mastercam and 3D Printing happenings, product offerings and update info along with general Industry trends and breaking news.
September 2015
Multi-material Color 3D Printing
“The multi-color and multi-material bio-models assist surgeons to uncover hidden tissues and blood vessels that may be blocked by larger organs in the 2D scans.” — Dr. Maki Sugimoto, associate professor at Kobe University Graduate School of Medicine
This 3D printed liver model makes teaching students about blood flow easier.
Multi-material color 3D printing enables bio-texture modeling of internal organs. […]
25 Years and Still Counting…Thank you!
25 Years…..where did the time go? Getting really excited for our big Open House on Oct 14th from noon to 6pm! We are hoping to see a lot of our long term customers as well as our new customers that we have had the pleasure to partner with over the years. The event is going to offer 16 different seminars in four different […]
Surgeons 3D Print Models of Children’s Brains
Reprint from 3dprint.com
While most of us have either been the patient undergoing a surgical procedure or a loved one waiting and worrying, few of us have had to be on the other side as the trained surgeon, who often bears the responsibility of performing numerous delicate procedures with lives in his hands on a daily basis. Many of us are thrilled to hear about the innovations 3D printing offers to the medical world as people […]
Mastercam X9 System Enhancements
In the Mastercam X9 release, there have been many System Enhancements that can be seen throughout the entire Mastercam Family of Products. This blog post will cover some of the big highlights, but you also visit whatsnew.mastercam.com for a list of everything in this new release.
The Plane Manager is now a modeless dialog box which means you can leave the
Plane Manager on the screen as you work in Mastercam’s primary interface. You can even move […]
Mastercam® for SOLIDWORKS® Now Included
Did you know that with the release of Mastercam X9 customers who purchase or update to Mastercam Mill X9 or Mastercam Lathe X9 will also be able to use the corresponding version of Mastercam® for SOLIDWORKS®? This really does give you the “Best of Both Worlds.”
Many of part files you receive with Mastercam are generated with SOLIDWORKS so for those of you who also use SOLIDWORKS […]
Mastercam Dynamic Motion on 4th axis
Did you think Dynamic motion was only for XYZ axis milling? Not so! Look at these pictures showing the rough and finish milling of 8 blades in 4140 Rc 30 using Dynamic Motion on a 4th axis.
We partnered with Sandvik […]