Call Us Today! 1866.277.8778|sales@cimquest-inc.com

Blog

Metrology Minute – Utilizing Color Maps for understanding machining outcomes

By |2024-09-04T10:30:44-04:00September 4th, 2024|Categories: Metrology Minute|

Utilizing Color Maps for understanding machining outcomes Consider this airfoil. It was programmed and machined on a 5-Axis mill, using a single setup. The ball mill was able to travel completely around the shape, during the machining process and therefore blending the top and bottom of the surface didn’t need to be considered. Our job is to inspect the airfoil and make suggestions to the CNC Programmer and Tool Designer to optimize the machining process. [...]

 0

How 3D Scanning Can Be Used in Mining

By |2024-09-03T11:24:00-04:00September 3rd, 2024|Categories: 3d Scanning & Reverse Engineering|Tags: , |

Miners face dangerous environments, extreme locations, and fluctuating demand. Efficiency and safety are top priorities, and 3D scanning technology may help achieve these goals. It redefines data acquisition for tunnels, shafts, stockpiles, and mills by offering speed and accuracy. 3D scanning is more efficient than traditional methods, capturing more data in less time with minimal disruption. It uses non-contact methods to gather data from risky or hard-to-reach areas, enhancing safety. 3D scan of an [...]

 0

Control X – Utilizing Color Maps and Whisker Plots | 2 Minute Tuesday

By |2024-09-02T11:24:50-04:00September 2nd, 2024|Categories: 2 Minute Tuesdays, CQTV|Tags: , , , , |

  Control X – Utilizing Color Maps and Whisker Plots | 2 Minute Tuesday In today's 2 Minute Tuesday, we show you how to interpret color maps to analyze tolerances and manufactured part accuracy in Oqton's Control X. Or watch and subscribe on YouTube ➤ https://youtu.be/-fHB8ma-PNU  

 0

Printing with 3rd-Party Materials on UltiMaker | 2 Minute Tuesday

By |2024-08-26T20:38:55-04:00August 26th, 2024|Categories: 2 Minute Tuesdays, CQTV|Tags: , , , |

  Printing with 3rd-Party Materials on UltiMaker | 2 Minute Tuesday In today's 2 Minute Tuesday, we are going to take a look at how to use third-party materials with UltiMaker 3D printers, focusing on the UltiMaker Marketplace and the process of importing print profiles into UltiMaker Cura. Or watch and subscribe on YouTube ➤ https://youtu.be/GzDgx5jFsS8

 0

Designing and Producing Hand Orthosis With Artus3D and the Fuse Ecosystem

By |2024-08-26T14:10:17-04:00August 26th, 2024|Categories: Technology|

Designing and Producing Hand Orthosis With Artus3D and the Fuse Ecosystem Artus3D, based in Ridderkerk, the Netherlands, offers orthotists an all-in-one solution for creating hand orthotics. With seven years of experience, they initially outsourced their 3D printing but faced challenges with reliability and shipping times. This changed when they discovered the Fuse 1+ 30W selective laser sintering (SLS) 3D printer and TPU 90A Powder, allowing them to bring production in-house. This move gave them more control over [...]

 0

Reaching Solutions by Scanning for 3D Printed Prosthetics

By |2024-08-26T13:26:41-04:00August 23rd, 2024|Categories: 3D Printing / Additive Mfg, 3d Scanning & Reverse Engineering, FormLabs|

Healthcare providers use 3D printing to enhance training, optimize pre-surgical prep, and create personalized tools. TTSH uses versatile resins for realistic prostheses. Transforming Patient Care at Tan Tock Seng Hospital’s Medical 3D Printing Centre Emergency surgeries need swift responses, making third-party vendors impractical. TTSH established an in-house 3D printing lab for timely, accurate solutions. The Centre, operational since 2020 and launched in 2022, 3D prints organ models for clearer medical explanations and surgical [...]

 0

Biggest 3D printing farm in Finland Aalto University’s Innovative Workshop

By |2024-08-21T12:18:10-04:00August 21st, 2024|Categories: 3D Printing / Additive Mfg, Technology, Ultimaker|

Biggest 3D printing farm in Finland Aalto University’s Innovative Workshop Aalto University in Espoo, Finland, hosts the country’s largest 3D printing workshop, equipped with 35 UltiMaker 3D printers. This workshop, led by Hector Velasquez, integrates traditional and digital manufacturing techniques, allowing students to explore and innovate in fields like fashion, architecture, and product design. The collaboration with UltiMaker has significantly enhanced students’ creativity and innovation, providing a dynamic learning environment with a wide range of [...]

 0

Mastercam 2025 – Chamfer Drill Maintain FPT | 2 Minute Tuesday

By |2024-08-19T17:12:31-04:00August 19th, 2024|Categories: 2 Minute Tuesdays, CQTV, Mastercam 2025|Tags: , , |

  Mastercam 2025 – Chamfer Drill Maintain FPT | 2 Minute Tuesday In this week's 2 Minute Tuesday, we show you a new feature in Mastercam's Chamfer Drill, "Maintain Feed Per Tooth." Or watch and subscribe on YouTube ➤ https://youtu.be/kxph2HY3j5w

 0
© Copyright   Cimquest Inc | All Rights Reserved
Toggle Sliding Bar Area
Go to Top