Welcome to the Cimquest Blog!
Check here often to find Cimquest, Mastercam and 3D Printing happenings, product offerings and update info along with general Industry trends and breaking news.
May 2020
Mastercam Intro to 2-Axis Lathe
Mastercam Intro to 2-Axis Lathe
Watch this on-demand replay of Mastercam 30-minute webinar that was live on May 5th. During this webinar the general interface as well as geometry types and preparation are demonstrated. Machine and tool loading, basic tool-paths, refined tool-paths, and similar part programming are also explored. After the Q&A portion there is a preview of part II where will be talking about Live Tooling.
https://cimquesttv.wistia.com/medias/tqmd0osgei?embedType=async&videoFoam=true&videoWidth=640
Upcoming Mastercam and Verisurf Webinars
This week we will be offering three great webinars, two of which will be tips and tricks using Verisurf and one will be on Mastercam. Full details are below. Make use of some of your downtime and join us for one or all of the following events.
Verisurf – Inspection Software Running Inside Mastercam
Date: Monday, May 4th
Time: 11:00 am
In […]
Mastercam Programming Multiple Parts in Assembly file
Mastercam Programming Multiple Parts in an Assembly file
Watch this on-demand replay of Mastercam 30-minute webinar that was live on May 1st which demonstrates Mastercam programming multiple parts in Assembly files and answers your questions.
https://cimquesttv.wistia.com/medias/kyavnptmxg?embedType=async&videoFoam=true&videoWidth=640
Lubrizol’s Powder TPU for 3D Printing Passes Skin Sensitization Tests
reprint from https://www.digitalengineering247.com/
This enables ESTANE 3D TPU M95A to be a material solution for product designers exploring 3DP for end-use applications that require skin contact.
Lubrizol’s 3D TPU is part of the material solutions for polymer powder bed fusion 3D printing. Image courtesy of Lubrizol.
Lubrizol Engineered Polymers’ new ESTANE 3D TPU M95A powder TPU has passed […]
April 2020
HP, packing density, does it really matter?
HP, packing density, does it really matter?
One of the parameters that is monitored by HP before sending a build to the MJF printer is “packing density”…but how much does it really matter? Join us as we take a closer look into the effects of pack density on your production, and discuss the pros and cons of both ends of the packing density spectrum.
https://cimquesttv.wistia.com/medias/05p45vfzaa?embedType=async&videoFoam=true&videoWidth=640
Verisurf – Inspection Software Running Inside of Mastercam
Verisurf – Inspection Software Running Inside of Mastercam – On Demand Webinar
In the first chapter of this webinar series we will exhibit the use of Master 3D Gage. We will demonstrate applying targets to a model to execute a 3-2-1 Alignment by way of using a 5mm Renishaw Ruby probe. Once aligned, we will use the BUILD module to verify the alignment and manually check coordinate locations on the model as well as establish how […]