Do More with PA 12 White Powder | 2 Minute Tuesday In this week's 2 Minute Tuesday, show off the new Formlabs Fuse-series white PA 12 powder. Or watch and subscribe on YouTube ➤ https://youtu.be/UhbHpur0p8M
Control X Pro – Batch Processing | 2 Minute Tuesday In this week's 2 Minute Tuesday, we demonstrate how Control X Professional can inspect many scans against a nominal CAD model while unmanned by using the Batch Processing tool. Or watch and subscribe on YouTube ➤ https://youtu.be/T_bE1y2EO_g
Do More with PreForm | 2 Minute Tuesday In this week's 2 Minute Tuesday, we dive into some exciting, new updates to Formlabs’ PreForm software. Or watch and subscribe on YouTube ➤ https://youtu.be/JXf8F5WGSHk
Mastercam 2025 – 3-Axis Deburr | 2 Minute Tuesday In this week's 2 Minute Tuesday, we'll demonstrate the new 3-Axis Deburr toolpath add-on for Mastercam 2025. Or watch and subscribe on YouTube ➤ https://youtu.be/0S0H6bA8TTA
Control X Pro – Airfoil Analysis and Inspection | 2 Minute Tuesday In this week's 2 Minute Tuesday, we demonstrate how Control X Professional can inspect and analyze an airfoil. Or watch and subscribe on YouTube ➤ https://youtu.be/Yh_LWgA21Ag
Transforming Industrial Casting with Formlabs’ Clear Cast Resin | 2 Minute Tuesday In this week's 2 Minute Tuesday, we’re diving into the fascinating world of investment casting with Formlabs’ Clear Cast Resin. Or watch and subscribe on YouTube ➤ https://youtu.be/beutBiOZ4CU
Mastercam 2025 – OptiRough Uniform Stepdown | 2 Minute Tuesday In this week's 2 Minute Tuesday, we examine a new enhancement to Mastercam 2025 for OptiRough, Uniform Stepdown. Or watch and subscribe on YouTube ➤ https://youtu.be/q0L4cld2ylQ
Design X Go – Modeling from a 2D Drawing | 2 Minute Tuesday In this week’s 2 Minute Tuesday, we explore some of the CAD modeling capabilities of Design X Go without the existence of a scan. We’ll then open the created model in Mastercam for toolpath generation. Or watch and subscribe on YouTube ➤ https://youtu.be/37rND743SJ8
