Mastercam 2025 – 3-Axis Deburr | 2 Minute Tuesday In this week's 2 Minute Tuesday, we'll demonstrate the new 3-Axis Deburr toolpath add-on for Mastercam 2025. Or watch and subscribe on YouTube ➤ https://youtu.be/0S0H6bA8TTA
Control X Pro – Airfoil Analysis and Inspection | 2 Minute Tuesday In this week's 2 Minute Tuesday, we demonstrate how Control X Professional can inspect and analyze an airfoil. Or watch and subscribe on YouTube ➤ https://youtu.be/Yh_LWgA21Ag
Transforming Industrial Casting with Formlabs’ Clear Cast Resin | 2 Minute Tuesday In this week's 2 Minute Tuesday, we’re diving into the fascinating world of investment casting with Formlabs’ Clear Cast Resin. Or watch and subscribe on YouTube ➤ https://youtu.be/beutBiOZ4CU
Mastercam 2025 – OptiRough Uniform Stepdown | 2 Minute Tuesday In this week's 2 Minute Tuesday, we examine a new enhancement to Mastercam 2025 for OptiRough, Uniform Stepdown. Or watch and subscribe on YouTube ➤ https://youtu.be/q0L4cld2ylQ
Design X Go – Modeling from a 2D Drawing | 2 Minute Tuesday In this week’s 2 Minute Tuesday, we explore some of the CAD modeling capabilities of Design X Go without the existence of a scan. We’ll then open the created model in Mastercam for toolpath generation. Or watch and subscribe on YouTube ➤ https://youtu.be/37rND743SJ8
Vapor Smoothing with the AMT PostPro SFX | 2 Minute Tuesday In this week’s 2 Minute Tuesday, we are going to examine the AMT PostPro SFX, the world’s first bench-top vapor smoothing system. With this, you can achieve a professional, smooth finish with minimal effort. Or watch and subscribe on YouTube ➤ https://youtu.be/FyBTS5AQByk
Mastercam 2025 – Analyze Deviation | 2 Minute Tuesday In this week's 2 Minute Tuesday, we are going to take a look at Analyze Deviation, a new set of Analyze functions, in Mastercam 2025. This time we will demonstrate Surface to Surface. Or watch and subscribe on YouTube ➤ https://youtu.be/FyZgli4bFpY
Design X Go for Mastercam Users | 2 Minute Tuesday In today's 2 Minute Tuesday, we explore the brand new Design X Go product from Oqton, focusing on reverse engineering applications for Mastercam users. Or watch and subscribe on YouTube ➤ https://youtu.be/o4FhCI0Vglk
