https://cimquesttv.wistia.com/medias/0551uqbbuk?embedType=async&videoFoam=true&videoWidth=640 Point Cloud Editing for 3D Printing, Reverse Engineering & More Geomagic Wrap has a collection of tools used for cleaning and finalizing polygonal files, to make them suitable for part inspection, reverse engineering, 3D Printing, and more.
Let’s take a look at the basics behind Deviation Analysis in Design X. This is an essential tool for reverse engineering and will ensure that you get the most out of your 3D scans. In Geomagic Design X, Deviation Analysis tells us how far off our derived CAD model is from our scan. There are typically three sources of error when scanning a part: There could be a slight error in the actual manufacturing of [...]
https://cimquesttv.wistia.com/medias/jmttit7g97?embedType=async&videoFoam=true&videoWidth=640 Reverse Engineering Tools, Pipe and Sweep Wizards Modeling wizards are intelligent tools used to extract 2 or 3 dimensional sketches, profiles, and features from 3D scan data. They help users perform tasks in an automated fashion, tasks that would otherwise be very complicated to perform manually.
https://cimquesttv.wistia.com/medias/4fqm35aas1?embedType=async&videoFoam=true&videoWidth=640 FreeScan 3D Scanner The Freescan is a hand-held 3D scanner weighing at just over 2 lbs. It is a laser scanner, adaptable to a variety of environments, whether it be on the shop floor or right inside of your office.
https://cimquesttv.wistia.com/medias/stu5biddc3?embedType=async&videoFoam=true&videoWidth=640 Using a Portable Arm for Part Inspection Today we use the Master 3D Gage to inspect a part in Verisurf. Verisurf software runs ‘inside’ Mastercam. This enables both CNC part programmers and part inspectors to use the exact same Interface to program and inspect parts.
https://cimquesttv.wistia.com/medias/bkocnq4jdx?embedType=async&videoFoam=true&videoWidth=640 Geomagic Reverse Engineering - Modeling Wizards Modeling wizards are intelligent tools used to extract 2 or 3-dimensional sketches, profiles, and features, from 3D scan data. Today we’ll provide a summary of two wizards.
https://cimquesttv.wistia.com/medias/7zg3c30ffk?embedType=async&videoFoam=true&videoWidth=640 Deviation Analysis in Design X Today we’re going to take a look at the basics behind Deviation Analysis in Design X. This is an essential tool for reverse engineering and will ensure that you get the most out of your 3D scans.
https://cimquesttv.wistia.com/medias/rxrj7k9uos?embedType=async&videoFoam=true&videoWidth=640 Batch Processing in Control X What happens when you have 10, 100 or even 1,000 parts to inspect? Would you need to run through the process manually that many times? Batch Processing in Control X offers a solution.
