cq-marketing

About Cimquest Marketing

This author has not yet filled in any details.
So far Cimquest Marketing has created 1278 blog entries.
6 07, 2021

Additive Manufacturing 2.0 – Featuring Metal Production Parts

By |2021-07-06T10:19:27-04:00July 6th, 2021|Categories: 2 Minute Tuesdays, 3D Printing / Additive Mfg, CQTV|0 Comments

https://cimquesttv.wistia.com/medias/7wy5fuvm7a?embedType=async&videoFoam=true&videoWidth=640 Additive Manufacturing 2.0 - Featuring Metal Production Parts This is a short segment from the presentation "Xpand3D Series- Reasons to Invest in Metal Production 3D Printing". You can watch the full 30-minute segment at https://wi.st/3wfZq4d.

2 07, 2021

Is Metal 3D Printing Ready for Primetime?

By |2021-06-29T08:40:51-04:00July 2nd, 2021|Categories: 3D Printing / Additive Mfg|0 Comments

By Joseph Castine A reprint from https://www.fabbaloo.com/news/lessons-from-cimquests-2021-xpand3d-event-part-one With the rapid expansion of the additive manufacturing industry, metal printing technologies continue to emerge, but this raises the question “Is Metal Printing Ready for Primetime?” The discussion by Nate Higgins (President, FreeFORM Technology), Ric Fulop (Founder/CEO, Desktop Metal), Bob Hedrick (President, CAMufacturing Solutions), Kenneth Fortier (Product Owner – Visualization and Simulation, Mastercam), and Rob Hassold (CEO/Founder, Cimquest) came together to discuss. The metal segment is one of [...]

30 06, 2021

Drone Customization With 3D Printing

By |2021-06-30T08:49:13-04:00June 30th, 2021|Categories: 3D Printing / Additive Mfg|0 Comments

a reprint from https://www.lubrizol.com/ Breakthrough TPU enables innovator to better serve hobbyists In the world of manufacturing, it’s often difficult to make the numbers work when serving a niche market. When your market is a niche of a niche, the challenge becomes even greater. Yet, R3D Shifters is doing just that, successfully catering to the hobbyist sector of the non-commercial drone market. “These aren’t the people who run out and buy a drone right off [...]

25 06, 2021

Selecting Your Company’s First 3D Scanner

By |2021-06-25T08:16:39-04:00June 25th, 2021|Categories: 3D Scanning|0 Comments

by Harry Foxman - a reprint from https://www.fabbaloo.com/news/lessons-from-cimquests-2021-xpand3d-event-part-one What to look for in selecting a 3D Scanner Over the past three decades, scanning technology has advanced immensely. It is now a helpful tool to be used in reverse engineering, inspection, and 3D printing. With a large number of different types of scanners from a variety of manufacturers on the market today, it is important that a company selects the correct one. Before beginning the search [...]

23 06, 2021

Desktop Metal Qualifies 4140 Low-Alloy Steel for High-Volume Additive Manufacturing

By |2021-06-23T08:11:27-04:00June 23rd, 2021|Categories: 3D Printing / Additive Mfg, Desktop Metal|0 Comments

The First Company to Qualify 4140 via Metal Binder Jetting for the Mass Production of Strong Steel Parts That Withstand High Impacts, Temperatures and Mechanical Stresses Desktop Metal, a leader in mass production additive manufacturing (AM) solutions, today announced it has qualified the use of 4140 low-alloy steel for the Production SystemTM platform, which leverages patent-pending Single Pass JettingTM (SPJ) technology designed to achieve the fastest build speeds in the metal additive manufacturing industry. Desktop [...]

18 06, 2021

Organic 3D Modeling with Freeform

By |2021-06-18T08:31:19-04:00June 18th, 2021|Categories: 3d Scanning & Reverse Engineering|0 Comments

In this post, we’ll take a look at Geomagic Freeform, an organic 3D design software. Freeform offers a sculpting and design toolset to sculpt, detail and deform virtual models into any form you desire. In this example, we’ll focus on Sub D Modeling. This Technique is used to create detailed modeling from a polygon mesh framework. Through Sub D modeling, you’re not modeling the actual surface or solid, you’re shaping the solid by manipulating the [...]

16 06, 2021

Desktop Metal Studio or Xact Metal XM200 3D Printing System?

By |2021-06-16T08:36:00-04:00June 16th, 2021|Categories: 3D Printing / Additive Mfg, Desktop Metal, XactMetal|0 Comments

How to make the best 3D Printing choice for your application First up, let’s talk about the Desktop Metal Studio System for low-volume or functional prototype 3D metal parts: What is unique about the Desktop Metal Studio System? The Desktop Metal Studio System is an end-to-end process with a software-managed workflow (Fabricate) to ensure your success. It utilizes a 3D technology called Bound Metal Deposition (BDM), which is comparable to one of the most widely [...]

14 06, 2021

Airfoil Analysis for Inspection

By |2021-06-14T17:43:35-04:00June 14th, 2021|Categories: 2 Minute Tuesdays, 3D Scanning, 3d Scanning & Reverse Engineering, CQTV|0 Comments

https://cimquesttv.wistia.com/medias/1irpz8ob26?embedType=async&videoFoam=true&videoWidth=640 Airfoil Analysis for Inspection Airfoil analysis is important when working with turbines, blisks, belongs, or blades. Through this feature, you can gather essential profile measurements, analyze results, and then generate inspection reports.

Go to Top