Welcome to the Cimquest Blog!
Check here often to find Cimquest, Mastercam and 3D Printing happenings, product offerings and update info along with general Industry trends and breaking news.
August 2019
HP Jet Fusion 3D Printing Shorten Time to Market – Part 4
Scaling to Production in Rapid Prototyping
This is the final segment in our Rapid Prototyping series and here we will talk about scaling to production. When creating a new product, there are often two sets of designs: One set is for 3D printing prototypes while the other is for producing the part. However, most designers only think in terms of the latter.
“When you’re developing a product, at each moment of the design, it is a final […]
July 2019
Sand Casting
This article is a reprint from the Formlabs blog.
In the last segment of this casting basics, we will discuss sand casting.
In the sand casting process, a foundry worker fills containers known as mold boxes or flasks with a mixture of sand and binder, then packs sand around the pattern. The pattern is removed to leave a negative impression of the pattern behind, and molten metal is poured into the cavity.
An open-faced […]
HP Jet Fusion 3D Printing Shortens Time to Market – Part 3
Last week we discussed the “value of functional prototypes” in rapid prototyping and today we are going to continue with a discussion about the color capabilities of the HP Jet Fusion technology.
Color Capabilities of HP Jet Fusion Technology
There are many ways to improve the value of a prototype, but one that is often overlooked is the addition […]
Indirect Investment Casting
This article is a reprint from the Formlabs blog.
So far we’ve covered some metal casting basics, as well as direct investment casting in our blog series on casting. Today we are moving to indirect investment casting.
The process of making patterns from molds or tooling is referred to as indirect investment casting because it requires creating molds for producing the patterns in addition to […]
HP Jet Fusion 3D Printing Shortens Time to Market – Part 2
The value of functional prototypes
Picking up where we left off on our article about “How HP Jet Fusion 3D Printing customers shorten their time to market” today we will discuss the value of functional prototypes.
In addition to print speed, the material properties of parts from HP Jet Fusion 3D Printing Solutions are ideal for prototyping and enable customers to make decisions about their final parts.
HP Multi Jet Fusion technology allows for […]
Direct Investment Casting
Last week we covered some metal casting basics and today we are going to pick up where we left off. Today we will talk about direct investment casting.
The direct investment casting process moves straight from creating a pattern to surrounding that pattern with investment material. Since the wax injection method of creating a pattern requires multiple steps, it is considered indirect.
Direct investment casting is best for short runs of parts or initial testing of a […]